Visual Fault Locator

This Universal Visual Fault Locator is streamline pencil styled that features a universal connector accepting any optical connector style with a 2.5mm ferrule and 1.25mm ferrule. The output is from a 650nm laser diode providing visibility to 6 Km ideally for both singlemode and multimode patchcord/cable plant inspection. Breaks, bad splices, tight crimps, faulty splice and bad connection can be identified by means of visible red laser emitting from the VFL.

Universal Visual Fault Locator

Two AAA size batteries (both Alkaline or rechargeable batteries) are used to keep the size and weight down. Low battery indicator is implemented to alert user when the battery capacity is low.

This VFL can be used to locate faults in patchcord with variety of connector types in both 2.5mm (such as FC, SC and ST) and 1.25mm (such as LC and MU) ferrule diameter.

Features

• Small size and lightweight.
• Find breaks, bad splices, tight crimp, faulty splice and bad connection.
• Suitable for both singlemode and multimode fiber patchcord.
• 650nm lasing wavelength provides a good balance of visibility and transmission range.
• Suitable for 2.5mm (FC, SC, ST) and 1.25mm (LC) ferrule diameter connectors.
• Laser driving mode in either Continuous or Pulse mode of 2.5Hz operation, with LED indicator.
• Low battery indicator on status LED.
• CE certification.

Specifications

Description	Part No.
Visual Fault Locator (with 1.25mm adaptor and patch cable of 2.5mm for FC, SC and ST)	VFL21

Description	Part No.
Visual Fault Locator (with 2.5mm adaptor and patch cable of 1.25mm for LC and MU)	VFL22